All categories · Italiano · English · Español · Français · Deutsch · العربية · Русский

Used diamond-cutting machines

2 machines · AUREO Machines

No. 18 — Faimond diamond-cutting machine for wedding rings and bracelets

Overall view of the used Faimond diamond-cutting machine
Overall view of the used Faimond diamond-cutting machine
Detail of the spindle, indexing head and adjustments
Detail of the spindle, indexing head and adjustments

Brand
Faimond — Mario Di Maio nameplate on the machine

Condition
Used

Description

Diamond-cutting machine for decorating and finishing wedding bands, rings and bracelets with diamond tools. The process produces faceted surfaces, grooves and decorative patterns that enhance reflections on the metal.

The photographed machine has a tool head, workholding spindle with indexing head, handwheel-adjusted slides and a separate control console. These adjustments position and orient the workpiece relative to the tool for machining around its circumference. The designation DLM C4 is visible on the console.

Available tooling, accessories and achievable finishes are defined according to the machine configuration and the required workpiece. Contact us for information on the supplied equipment and a quotation.

Finishing examples and illustrative diagram

The images show finishing examples; the diagram illustrates the positioning principle of the axes and indexing head.

Illustrative axes and indexing-head diagram
Illustrative axes and indexing-head diagram

Back to top

No. 39 — Coin and medal diamond cutting machine A.R.A.

No. 39 — Coin and medal diamond cutting machine A.R.A.

Brand
A.R.A. s.n.c. di Maranzan Giampietro & C. – Vicenza

Description

Diamond cutting machine for coins and medals: the blank is clamped in a pneumatic collet on the rotating spindle and worked by the diamond-tipped tool on the upper head, which cuts mirror micro-facets into the face and the edge. Slides with micrometric handwheels for positioning, index for angular repetition of the cuts. Separate panels with fan, cutter, speed adjustment, start and collet controls; 380 V supply. Transparent guard over the working area. Available as several units side by side in line. Second photo: detail of the tool and the workpiece in the collet.

Back to top