Presses and stamping

Brand
Officine S. Giacomo – Sangiacomo Presse, Vittorio Veneto (TV)

Model
T 10 CE – serial no. 13945 – year 2012 – rated force 100 kN

Description

Eccentric mechanical C-frame press, one-piece frame, rated force 100 kN. Operating mode selector for single/continuous by foot pedal, single/continuous two-hand control and setting mode; closed-die working selection, motor reversal and reverse rotation. Movable guard over the die area with safety microswitches, emergency stop and foot control. Quality control panel with Schneider Magelis operator terminal. CE compliant, fully overhauled and ready for use. Second photo: control panel detail.

Brand
Rispopresse S.r.l. – Campiglia dei Berici (VI)

Description

C-frame hydraulic press with platen die, movable guard with barrier and orange cover, pressure gauges and PLC control panel with keypad. CE marked. Rispopresse builds mechanical and hydraulic presses for sheet metal work, specialising in coining presses; models are identified by tonnage (100, 300, 800 t). The company now continues as L.M.S. S.r.l. at the same address.

Brand
‘MG – Arezzo’ mark

Description

Hydraulic press with enclosed frame and work table. Sliding transparent front guard with safety switch, and safety light curtains on both sides of the working area. Pressure gauge, operator panel with digital display, selectors and push-buttons, two-hand control console with emergency stop. Brass maker’s plate with MG monogram and AREZZO wording.

Description

Hydraulic press with enclosed column frame and grille guard over the working area. Pressure gauge, selectors and push-buttons on the side, two-hand controls with emergency stop, circuit breaker in the lower side panel. Blue-painted structure.

Brand
Mario Di Maio S.p.A. (Milan)

Description

Hand-operated fly/screw press with flywheel and side lever, one-piece cast iron frame on a fabricated base. Typically used for blanking and drawing small parts in the goldsmith’s workshop.

Brand
Mario Di Maio (MDM)

Model
200 ton coining press – new pump, fully overhauled

Description

200 ton hydraulic coining press for medals, coins and blanks. Heavy plate frame with wide working window and toolholder platen, movable guard over the die area, transparent screen, pressure gauge, two-hand controls and emergency stops on the front. Separate hydraulic power pack with motor and filter unit at the side. New pump fitted and machine fully overhauled. Second photo: front view.

Brand
Mario Di Maio S.p.A. – Milan

Model
Mini Combi 10 (plate: Combi / 10 ton) – serial 21 G 035

Description

Hydraulic press with a rated force of 10 ton, for blanking, coining and drawing of small parts. Column frame with chromed columns, transparent front guard and ReeR Admiral safety light curtains on both sides of the working area. Stroke set on the head with two handwheels and digital counters (division 0.1 mm): maximum stroke 60 mm, minimum up-down 6 mm; stroke counter. Pressure set by knob with 0-600 bar gauge and conversion table from 1 to 10 ton (20 to 200 bar). Control panel with two-hand push-buttons, key selector for manual, single-pedal and continuous-pedal modes, return button, on/off and emergency stop; foot pedal supplied. Hydraulic power unit housed in the base cabinet, with motor, valve block and oil tank with level gauge. Electrical supply 400 V three-phase, 50 Hz, 2.2 kW. CE marked, supplied with the operating and maintenance manual. Second photo: head with stroke setting. Third photo: control panel and power unit.

Brand
LMS — Locatelli Meccanica, Subbiano (AR), Italy

Model
T.35 2C — 35 ton

Description

CE-marked C-frame hydraulic press with manufacturer’s plate showing model T.35 2C and a bar/kN/ton conversion table, plus a second plate with the dimensional drawing. Large steel table with circular T-slot pattern and bolster, SICK light curtains on both sides of the working area and side operator panel. Oil tank in the base, hydraulic power unit with electric motor, directional and pressure valves, pressure gauge and hard piping to the cylinder. Front panel with pressure gauge and two adjusting knobs. Green finish.

Brand
Mario Di Maio S.p.A. — 20122 Milan, Italy (plate on the front panel)

Model
No model designation visible on the machine — 800 ton

Description

Hydraulic press with a full polycarbonate enclosure on an aluminium frame, hinged front door with safety switch and side handles. Bilingual control panel for the hydraulic unit, oil overtemperature, filter status, start and motor protection, with mushroom emergency stop. Large 0-1600 bar pressure gauge on the front. Perforated steel work surfaces beside the working area, articulated blow gun and tool-holder block on the table. Closed cabinet base with hydraulic unit and disconnect switch. Press force: 800 ton.